MULTI SMART +
A premium IoT device capable of:

• Remote monitoring of doors, trip switches, and other items that indicate on/off conditions.
• Remote temperature monitoring
• And more …

Order Now! Same day shipment for orders received before 12PM California time.

Questions may be submitted via our Support page.

Please visit our Store to learn more about available options and pricing.

Get many smart home system features at an affordable price

Wireless Enabled Friendly “Door / Gate Open” Reminder Function

• Brief, customizable, chirps on optional chime / bell when garage-door, gate, window left open too long
• Reminder Alerts on your smart-phone
• Fully customizable reminder sequence times :: Defaults to 10, 30, 60, 120, and 240 minutes

Wireless Enabled Full Alarm Function

• Alerts you when an optional intrusion sensor has been tripped
• Separate from Reminder Subsystem :: Full Alarm When In Armed Alarm Mode
• Customizable, full alarm sequence on optional siren / bell upon intrusion
• Alarm Alert on your smart-phone with remote control disarm / re-arm capability
• May use any combination of same or different sensors as Reminder Function

 

Access all features and even device temperature from anywhere with your smart-phone

• Super easy to use!
• Phone App access from anywhere[1]
• Full manual remote control

Free software upgrades install in 2 minutes via Over-The-Air (OTA) updates.

Sensor Input Ideas
Sense magnetic door switches ($2)[1], motion-detectors ($11), photo-beam ($22), virtually any 2 wire on/off sensor. Up to 4 separate inputs. Sensors may be daisy chained to allow for dozens of sensors across 4 zones. Direct wired reliability.

12V Output Accessories

Connect / control 12v lights, sirens ($15), electric locks ($25), bells, sprinkler valves, anything! Up to 4 separate outputs. Easy-connect screw terminals. No monthly fees!

Configure timers, alarm & reminder logic, and other functions from an easy to use, fully documented, phone app.

Update the phone app and device software with single pushbutton updates on the phone app.

Control 12 volt accessories remotely or by timer or alarm logic. Remotely notify your phone of sensor data and power glitches.

DMGK2 range to wireless router similar to typical smartphone. When DMGK2 is connected to a wireless router, it may be accessed from anywhere the phone has internet access.

No microphone that could intrude upon your privacy.

The MULTI-SMART+ provides for many of your door, gate, and remote control needs!

• Does your dog get out because your kids always leave the gate open? MULTI-SMART+
• Do you need to be reminded when a home, auto, RV, or business door or gate is open on some regular interval that doesn’t annoy you but does keep you informed? MULTI-SMART+
• Do you need to monitor several doors / gates and have a unified indicator that is highly configurable?
• Do you want a log of how many times a door or gate is opened and when?
• Would a door and gate monitor that links to your cell phone be a thing for you?

The MULTI-SMART+ is a highly configurable door and gate alarm. Most door and gate alarms emit an annoying alarm for as long as the door or gate is open.

Not so with the MULTI-SMART+! A highly configurable and simple to use multi-input, multi-output, multi-timer provides reminders at multiple intervals.

You can set how often it reminds you and for how long the reminder lasts!

For example, after a gate opens, the MULTI-SMART+ can remind you to close it at preset intervals such as our recommended defaults of 5 minutes, 30 minutes, 60 minutes, 2 hours, and 3 hours with each of the reminders being 4 quick chirps lasting ¼ second each. Four short chirps at any set of intervals you desire! Or maybe you want 6 chirps that are 2 seconds each? Whatever you want! It’s all pre-configured to intelligent human-factors tested defaults and easy to change to your specific needs and preferences.

But wait, there’s more! Each MULTI-SMART+ can serve up to 4 doors / gates zones (with multiple doors/gates per zone) and up to 4 different outputs. And if that’s not enough, you can cascade multiple MULTI-SMART+ units to serve larger numbers of doors and gates all to a single or multiple alarms as you desire. And you can see all of this activity from your cell phone as well! You can even see the open / close notification log, and the actuation date-time-stamps. And even remotely control alarms and other accessories right from your cell phone. It’s all built into the integrated MULTI-SMART+ package that includes the DMGK2 module and cell phone configuration, control, and notification app.

The DMGK2 module uses the latest compact electronic technology and wireless protocols to communicate with virtually any Android based smart-phone. The cell phone is primarily used to configure the module and once done, everything operates without further need for the phone connection. But you can access it remotely from anywhere your phone has internet access.

The module comes in a compact 2.5x3x1 inch mountable case and can be powered by an optional 12v AC adapter or a local 12v source such as a car or truck battery, which is trickle charged by the AC adapter through the DMGK2 internal charging system; providing for a complete battery backed system where reliability is of great importance. Control accessories within your car or truck all from the screen of your cell phone! Even the DMGK2’s internal temperature can be viewed so you can see the temperature inside your car, truck, trunk, or RV interior where-ever you mounted it. It’s all configurable through the DMGK2’s easy to use cell-phone app. All this and more. What will you do with the DMGK2’s 4 inputs, 4 outputs, timers, and configurable logic?

Get your MULTI-SMART+, and get busy keeping the dog in the yard, watch how many times people are coming and going when you’re not around, and a whole host of other things you can do with this simple to use, cell-phone configurable wonder of electronic wizardry.